FC9128

The FC9128 has been specially developed for the manual and machine cleaning of soiled printing plates and machine parts coated with solvent-based and UV inks. The right combination of various relatively safe solvents ensures that the FC9128 is ready to use and suitable for virtually all common surfaces. A proven alternative to solvents such as ethyl acetate and ethanol.

A proven alternative to solvents such as ethyl acetate and ethanol

The right combination of various relatively safe solvents ensures that the FC9128 is ready to use

Suitable for almost all surfaces

Application - For professional use only

Manual

Apply FC9128 to the surface to be cleaned. You can do this using a cloth or a scouring pad, or by spraying it on with a spray bottle. Allow FC9128 to sit for a few minutes or rub it in with the scouring pad. Then rinse thoroughly with clean water. Repeat the above steps depending on the level of soiling.

Machine

Add the FC9128 undiluted to the cleaning machine’s tank. Place the soiled parts in the machine and start the wash cycle. NOTE: The FC9128 does not need to be heated; please take this into account when selecting the wash cycle.

Chemical properties

Physical condition:

clear, colorless liquid

Scent:

characteristic

Foaming:

None

pH level:

N/A

Dilution:

undiluted

Packaging:

20 kg, 200 kg, 950

Soluble in water:

Fully miscible

Safety and Regulations

Classification:

warning

H-sentences:

H319 - causes serious eye irritation
H335 - May cause respiratory irritation

Safe for:

stainless steel, aluminum, ceramic, polyethylene (PE), polypropylene (PP)

Not safe for:

N/A

Other materials:

Please contact Clean Solutions Group

Always read the label and the safety data sheet (SDS).

Request a TDS/SDS

Technical data and safety data sheet available upon request.

Need more information or advice?

Our specialists will help you choose the right cleaning product for your needs.