FC Multicleaner UV/SB-AS

The FC Multicleaner UV/SB-AS has been specially developed for both manual and machine cleaning of printing plates and machine parts contaminated with solvent-based and UV inks. Thanks to the right combination of various, relatively safe solvents, the FC Multicleaner UV/SB-AS is ready to use and suitable for almost all common surfaces.

Ready to use

For cleaning printing plates and machine parts

Relatively safe solvents

Application - For professional use only

Manual

Apply FC Multicleaner UV/SB-AS to the surface to be cleaned. You can do this using a cloth or sponge, or by spraying it on. Allow the FC Multicleaner UV/SB-AS to sit for a few minutes, or scrub it in with a power sponge. Then rinse thoroughly with clean water. Depending on how dirty the surface is, repeat the steps above.

Inline

Add the FC Multicleaner UV/SB-AS undiluted to the cleaning machine’s tank. Place the soiled parts in the machine and start the wash cycle. NOTE: The FC Multicleaner UV/SB-AS does not need to be heated; please take this into account when selecting the wash cycle.

Chemical properties

Physical condition:

clear yellow liquid

Scent:

characteristic

Foaming:

None

pH level:

N/A

Dilution:

undiluted

Packaging:

20 kg, 200 kg, 1,000 kg

Soluble in water:

Fully miscible

Safety and Regulations

Classification:

warning

H-sentences:

H319 - causes serious eye irritation
H335 - May cause respiratory irritation

Safe for:

stainless steel, aluminum, ceramic, polyethylene (PE), polypropylene (PP)

Not safe for:

N/A

Other materials:

Please contact Clean Solutions Group.

Always read the label and the safety data sheet (SDS).

Request a TDS/SDS

Technical data and safety data sheet available upon request.

Need more information or advice?

Our specialists will help you choose the right cleaning product for your needs.