Automatic Cliché Cleaner WB

Automatic Cliché Cleaner WB is designed for the thorough and rapid cleaning of flexographic printing plates contaminated with water-based printing inks. Automatic Cliché Cleaner WB is suitable for various types of plates and can be used both manually and with machinery.

Designed for cleaning printed circuit boards contaminated with water-based ink

Suitable for various types of panels

Can be applied both by machine and by hand

Application - For professional use only

Manual

Pour the Automatic Cliché Cleaner WB in the correct concentration (max. 1:5 with water) into a bucket or spray bottle. Apply the product to the surface to be cleaned. Let it sit for a few minutes (the time depends on the level of soiling). Rinse thoroughly with clean water.

Machine

Add the Automatic Cliché Cleaner WB in the correct concentration (max. 1:5 with water) to the washing system’s reservoir. Heat the cleaning solution if possible, but do not exceed 40°C. Place the printing plates in the washing machine and start the program. Be sure to also read the cleaning machine’s operating manual.

Chemical properties

Physical condition:

colorless liquid

Scent:

characteristic

Foaming:

None

pH level:

N/A

Dilution:

up to 1:5 with water

Packaging:

20 kg, 200 kg

Soluble in water:

Fully miscible

Safety and Regulations

Classification:

GHS-07 Warning

H-sentences:

H319 - causes serious eye irritation
H335 - May cause respiratory irritation

Safe for:

stainless steel, aluminum, ceramic, polyethylene (PE), polypropylene (PP)

Not safe for:

N/A

Other materials:

Please contact Clean Solutions Group.

Always read the label and the safety data sheet (SDS).

Request a TDS/SDS

Technical data and safety data sheet available upon request.

Need more information or advice?

Our specialists will help you choose the right cleaning product for your needs.