Anilox Aftercare

Removes stubborn stains, streaks, and scratches from anilox rolls

Item No. 92722

Anilox After Care is an acidic manual cleaner specially formulated to remove stubborn deposits that remain on the anilox roller. It is suitable for removing stains, streaks (tiger stripes), and scratches (scoring lines and edge scratches).

  • Voor periodieke reiniging
  • Verwijdert ongewenste vlekken, strepen (tigerstripes) en krasjes
  • Resultaat: een egale grijze keramische kleur
Contact an expert
Request product information

Product highlights

Periodic cleaning

Designed for specialized, manual maintenance of anilox rolls and ceramic sleeves.

Removing streaks and stains

Removes stubborn streaks (tiger stripes) and dark spots after cleaning and drying.

Uniform ceramic color

Restores a uniform, grey ceramic appearance to the anilox roller.

Product Description

Anilox After Care is a specialized cleaner for professional use in flexographic printing. The product is designed to remove residue that forms after cleaning and drying anilox rolls, including streaks (tiger stripes) and dark spots. By using a combination of acids, the residue is effectively loosened without damaging the ceramic structure, provided it is applied correctly.

Application

Dosage

Apply Anilox After Care undiluted to the anilox roller or ceramic sleeve using the power sponge.  

  • Apply Anilox After Care undiluted to the soiled anilox roller and rub it in thoroughly using the Power Sponge. 
  • Allow the Anilox After Care to sit for 10 to 15 minutes, then treat the roller again with the Power Sponge.
  • Rinse the roller thoroughly with clean water, or, if possible, rinse it off under high pressure.
  • Then dry the roller with a clean cloth.

Prevent Anilox After Care from drying on the anilox roller. Dried product can cause contaminants to harden again, unnecessarily slowing down the cleaning process.

Technical Information

  • Physical state: Bright red liquid
  • pH-waarde: <1
  • Dilution: undiluted
  • VOC: 0%
  • Biodegradable: Yes

Request a TDS / SDS

For detailed technical specifications, safety information, or application advice, please contact our specialists.

Request a TDS / SDS

Safety & Regulations

Classification

Danger 

GHS pictogram 05: Corrosive hazard

  • H290 – May be corrosive to metals
  • H314 – Causes severe burns and eye damage
  • stainless steel
  • ceramic surfaces
  • aluminum (uncoated)
  • zinc
  • galvanized material,
  • zinc silicate coatings
  • Be careful with rubber rollers (test them first).
Always read the label and the safety data sheet (SDS).

Would you like more information or advice on cleaning your grid rollers?

Our specialists are happy to help you choose the right cleaning agent and develop an effective maintenance program for your grid rollers.

Contact Clean Solutions Group